CAJ | 학술논문

针对目前温室控制中的网络化程度不足，设计了以测量和控制温室内温湿度为目的温室远程监测和控制系统。系统采用STM 32单片机作为温室内的控制器，通过温湿度传感器 DHT 11测量温室内的空气温湿度，并通过继电器模块控制温室内的加热系统和湿帘系统，实现对温室内温湿度的调节。在STM32控制器的设计中加入ENC28J60模块，并在STM 32上进行LwIP 协议的移植，使STM 32控制器可以接入网络。利用MFC编写的远程控制软件可以通过TCP／IP 协议与STM 32进行通信，进行数据的接收、处理以及存储，实现对温室内温湿度的远程监测和控制。
침대목전온실공제중적망락화정도불족，설계료이측량화공제온실내온습도위목적온실원정감측화공제계통。계통채용STM 32단편궤작위온실내적공제기，통과온습도전감기 DHT 11측량온실내적공기온습도，병통과계전기모괴공제온실내적가열계통화습렴계통，실현대온실내온습도적조절。재STM32공제기적설계중가입ENC28J60모괴，병재STM 32상진행LwIP 협의적이식，사STM 32공제기가이접입망락。이용MFC편사적원정공제연건가이통과TCP／IP 협의여STM 32진행통신，진행수거적접수、처리이급존저，실현대온실내온습도적원정감측화공제。
According to the low networking degree of greenhouse control, a remote monitoring and control system is designed to measure and control the temperature and humidity in greenhouse.This system uses the STM32 as the controller,uses the temperature and humidity sensor DHT11 to measure temperature and humidity and the relay to control the heating and cooling system in the greenhouse, which achieve temperature and humidity regulation in the greenhouse.The ENC28J60 module is added into the design of STM32 controller, which can access the network by transplanting LwIP protocol. The remote control software designed by MFC communicates with the STM32 by TCP/ IP protocol for data reception,processing and storage to achieve remote monitoring and control of the temperature and humidity in the greenhouse.