化工学报
化工學報
화공학보
CIESC Jorunal
2014年
z1期
308-315
,共8页
池沸腾%强化换热%纳米结构%临界热通量%气泡%相变
池沸騰%彊化換熱%納米結構%臨界熱通量%氣泡%相變
지비등%강화환열%납미결구%림계열통량%기포%상변
pool boiling%enhanced heat transfer%nanostructure%critical heat flux%bubble%phase change
以多个不同管径的TiO2纳米管阵列表面以及不同Ti表面作为换热壁面,以去离子超纯水作为工质,进行重复池沸腾实验.在实验前后进行了样品润湿性能测试实验,测量了超纯水在样品表面上的静态接触角;在实验中,使用高速摄像机观测气泡动力学过程.实验结果表明,管径不是对池沸腾换热性能产生重要影响的唯一主要因素,管径尺度的凹坑难以形成有效的汽化核心,不利于强化换热.实验中没有观察到大量微小气泡,证实没有大量有效的汽化核心.由于TiO2纳米管阵列表面的润湿性能较好,其能明显提高池沸腾的临界热通量(CHF),最大增幅度可达116%.但部分样品在经历CHF后会出现脱落现象,脱落后,CHF明显降低.
以多箇不同管徑的TiO2納米管陣列錶麵以及不同Ti錶麵作為換熱壁麵,以去離子超純水作為工質,進行重複池沸騰實驗.在實驗前後進行瞭樣品潤濕性能測試實驗,測量瞭超純水在樣品錶麵上的靜態接觸角;在實驗中,使用高速攝像機觀測氣泡動力學過程.實驗結果錶明,管徑不是對池沸騰換熱性能產生重要影響的唯一主要因素,管徑呎度的凹坑難以形成有效的汽化覈心,不利于彊化換熱.實驗中沒有觀察到大量微小氣泡,證實沒有大量有效的汽化覈心.由于TiO2納米管陣列錶麵的潤濕性能較好,其能明顯提高池沸騰的臨界熱通量(CHF),最大增幅度可達116%.但部分樣品在經歷CHF後會齣現脫落現象,脫落後,CHF明顯降低.
이다개불동관경적TiO2납미관진렬표면이급불동Ti표면작위환열벽면,이거리자초순수작위공질,진행중복지비등실험.재실험전후진행료양품윤습성능측시실험,측량료초순수재양품표면상적정태접촉각;재실험중,사용고속섭상궤관측기포동역학과정.실험결과표명,관경불시대지비등환열성능산생중요영향적유일주요인소,관경척도적요갱난이형성유효적기화핵심,불리우강화환열.실험중몰유관찰도대량미소기포,증실몰유대량유효적기화핵심.유우TiO2납미관진렬표면적윤습성능교호,기능명현제고지비등적림계열통량(CHF),최대증폭도가체116%.단부분양품재경력CHF후회출현탈락현상,탈락후,CHF명현강저.