郑州大学学报(工学版)
鄭州大學學報(工學版)
정주대학학보(공학판)
Journal of Zhengzhou University(Engineering Science)
2015年
5期
30-34
,共5页
高莉宁%贾秦龙%晏永%郭涛%夏慧芸%陈华鑫
高莉寧%賈秦龍%晏永%郭濤%夏慧蕓%陳華鑫
고리저%가진룡%안영%곽도%하혜예%진화흠
沥青乳化剂%微表处%改性乳化沥青%油酸
瀝青乳化劑%微錶處%改性乳化瀝青%油痠
력청유화제%미표처%개성유화력청%유산
asphalt emulsifier%micro-surfacing%modified emulsified asphalt%oleic acid
微表处中沥青乳化剂的相关性能对改性乳化沥青及稀浆混合料性能至关重要.笔者利用油酸、多胺、有机氯酸以及氯醇等为原料合成了两性沥青乳化剂,分析了乳化剂的红外光谱、表面张力、亲水亲油平衡值(HLB值);测试了5% SBS掺量改性乳化沥青的性质和稀浆混合料的技术指标.结果显示:乳化剂的临界胶束浓度为2.63×10-5 mol/L,此时表面张力46.11 mN/m;乳化剂HLB值为12.7;当乳化剂用量为1.5%时,改性乳化沥青蒸发残留物的25℃针入度为6.2 mm,软化点为78.5℃,5℃延度为35 cm;微表处混合料60 rain凝聚力值达到2.4N·m,为中度成型,浸水1h和浸水6h湿轮磨耗值均满足规范要求.
微錶處中瀝青乳化劑的相關性能對改性乳化瀝青及稀漿混閤料性能至關重要.筆者利用油痠、多胺、有機氯痠以及氯醇等為原料閤成瞭兩性瀝青乳化劑,分析瞭乳化劑的紅外光譜、錶麵張力、親水親油平衡值(HLB值);測試瞭5% SBS摻量改性乳化瀝青的性質和稀漿混閤料的技術指標.結果顯示:乳化劑的臨界膠束濃度為2.63×10-5 mol/L,此時錶麵張力46.11 mN/m;乳化劑HLB值為12.7;噹乳化劑用量為1.5%時,改性乳化瀝青蒸髮殘留物的25℃針入度為6.2 mm,軟化點為78.5℃,5℃延度為35 cm;微錶處混閤料60 rain凝聚力值達到2.4N·m,為中度成型,浸水1h和浸水6h濕輪磨耗值均滿足規範要求.
미표처중력청유화제적상관성능대개성유화력청급희장혼합료성능지관중요.필자이용유산、다알、유궤록산이급록순등위원료합성료량성력청유화제,분석료유화제적홍외광보、표면장력、친수친유평형치(HLB치);측시료5% SBS참량개성유화력청적성질화희장혼합료적기술지표.결과현시:유화제적림계효속농도위2.63×10-5 mol/L,차시표면장력46.11 mN/m;유화제HLB치위12.7;당유화제용량위1.5%시,개성유화력청증발잔류물적25℃침입도위6.2 mm,연화점위78.5℃,5℃연도위35 cm;미표처혼합료60 rain응취력치체도2.4N·m,위중도성형,침수1h화침수6h습륜마모치균만족규범요구.