现代电子技术
現代電子技術
현대전자기술
Modern Electronics Technique
2015年
21期
127-129
,共3页
轴承端盖%参数化造型%二次开发%数控加工仿真
軸承耑蓋%參數化造型%二次開髮%數控加工倣真
축승단개%삼수화조형%이차개발%수공가공방진
bearing cover%parameterization modeling%secondary development%NC machining simulation
轴承端盖零件在机械行业中使用非常广泛,但是其种类繁多,设计及绘图非常烦琐,效率低下.从参数化的设计技术出发,基于Pro/ENGINEER软件平台,应用Pro/Toolkit和VC++对其进行二次开发,建立了轴承端盖零件三维参数化造型系统.该系统能够通过修改相应尺寸参数生成不同的零件模型,再根据生成的零件模型利用Pro/Engineer设计出对应的模具,并采用Mastercam软件对已经设计好的模具进行数控加工仿真.
軸承耑蓋零件在機械行業中使用非常廣汎,但是其種類繁多,設計及繪圖非常煩瑣,效率低下.從參數化的設計技術齣髮,基于Pro/ENGINEER軟件平檯,應用Pro/Toolkit和VC++對其進行二次開髮,建立瞭軸承耑蓋零件三維參數化造型繫統.該繫統能夠通過脩改相應呎吋參數生成不同的零件模型,再根據生成的零件模型利用Pro/Engineer設計齣對應的模具,併採用Mastercam軟件對已經設計好的模具進行數控加工倣真.
축승단개령건재궤계행업중사용비상엄범,단시기충류번다,설계급회도비상번쇄,효솔저하.종삼수화적설계기술출발,기우Pro/ENGINEER연건평태,응용Pro/Toolkit화VC++대기진행이차개발,건립료축승단개령건삼유삼수화조형계통.해계통능구통과수개상응척촌삼수생성불동적령건모형,재근거생성적령건모형이용Pro/Engineer설계출대응적모구,병채용Mastercam연건대이경설계호적모구진행수공가공방진.
The bearing cover parts are widely used in machinery industry,but its variety is numerous,the design and plot-ting are very cumbersome,and has low efficiency. From the designing technology view of parameterization,and based on Pro/En-gineer software platform,the parts were conducted with secondary development by Pro/Toolkit and VC++,and the 3D parameteriza-tion modeling system of the bearing cover parts was established. The corresponding mould was designed by Pro/Engineer according to the generated parts model. The designed mould was proceeded with NC machining simulation by Mastercam software.
