CAJ | 학술논문

为详细了解螺旋挤压工艺对聚合物物料的性能产生的影响，在螺杆转速为10 rpm，进出口压差为2×107 Pa 工艺条件下，利用网格重叠技术，借助于 Polyflow 软件数值模拟单螺杆均化段挤压过程。分析流道内压强、速度、剪切速率、黏度、黏性生热和温度场的分布规律，为进一步优化工艺参数提供理论依据。
위상세료해라선제압공예대취합물물료적성능산생적영향，재라간전속위10 rpm，진출구압차위2×107 Pa 공예조건하，이용망격중첩기술，차조우 Polyflow 연건수치모의단라간균화단제압과정。분석류도내압강、속도、전절속솔、점도、점성생열화온도장적분포규률，위진일보우화공예삼수제공이론의거。
In order to investigate the influence of polymer material,the Polyflow software was used to simulate the spiral extrusion process with the MST technology.When the rotation speed was 10rpm,the pressure difference be-tween the entrance and exit of the extruder was 2 ×107 Pa.Six parameters (the pressure,the velocity,the local shearing rate,the viscosity,the viscosity heating and the temperature)were analyzed in the runner.It aims to pro-vide theoretical basis for further optimization of process parameters.