合成树脂及塑料
閤成樹脂及塑料
합성수지급소료
China Synthetic Resin and Plastics
2015年
5期
17-20
,共4页
魏徵%刘信%余红伟%关旭
魏徵%劉信%餘紅偉%關旭
위징%류신%여홍위%관욱
吸油树脂%吸油率%缓释保油率%缓释动力学
吸油樹脂%吸油率%緩釋保油率%緩釋動力學
흡유수지%흡유솔%완석보유솔%완석동역학
oil absorption resin%oil absorption%controlled-release absorption%controlled-release kinetics
以聚甲基丙烯酸丁酯(PBMA)和聚甲基丙烯酸十二酯(PLMA)两种吸油树脂对航空煤油和二甲苯的缓释过程为对象,研究了他们对这两种油品的吸油率(Q)、缓释保油率(Ka)以及缓释动力学过程.研究表明:PBMA和PLMA对航空煤油和二甲苯的Q都随时间延长而增大;PBMA和PLMA对航空煤油的缓释性能均较好,Ka在98%以上;对航空煤油和二甲苯,PBMA的Ka均大于PLMA;PBMA对航空煤油的缓释速率大于对二甲苯,PLMA对二甲苯的缓释速率则大于航空煤油.
以聚甲基丙烯痠丁酯(PBMA)和聚甲基丙烯痠十二酯(PLMA)兩種吸油樹脂對航空煤油和二甲苯的緩釋過程為對象,研究瞭他們對這兩種油品的吸油率(Q)、緩釋保油率(Ka)以及緩釋動力學過程.研究錶明:PBMA和PLMA對航空煤油和二甲苯的Q都隨時間延長而增大;PBMA和PLMA對航空煤油的緩釋性能均較好,Ka在98%以上;對航空煤油和二甲苯,PBMA的Ka均大于PLMA;PBMA對航空煤油的緩釋速率大于對二甲苯,PLMA對二甲苯的緩釋速率則大于航空煤油.
이취갑기병희산정지(PBMA)화취갑기병희산십이지(PLMA)량충흡유수지대항공매유화이갑분적완석과정위대상,연구료타문대저량충유품적흡유솔(Q)、완석보유솔(Ka)이급완석동역학과정.연구표명:PBMA화PLMA대항공매유화이갑분적Q도수시간연장이증대;PBMA화PLMA대항공매유적완석성능균교호,Ka재98%이상;대항공매유화이갑분,PBMA적Ka균대우PLMA;PBMA대항공매유적완석속솔대우대이갑분,PLMA대이갑분적완석속솔칙대우항공매유.
The oil absorption performances of PBMA and PLMA for aviation kerosene and dimethylbenzene were studied. and Q,Ka and the controlled-release process were also analyzed. The results show that the oil-absorption of PBMA and PLMA increase with the time,PBMAAND PLMA have excellent controlled-release ability,and Ka of both are greater than 98%,For aviation kerosene and dimethylbenzene, PBMA has higher Ka than PLMA,at the same time,concerning controlled-release rate for aviation kerosent, PBMA performs better comparing with dimethylbenzene,while PLMA better for dimethylbenzene release.
