金属矿山
金屬礦山
금속광산
Metal Mine
2015年
10期
152-155
,共4页
任富强%常远%常来山%陈东伟
任富彊%常遠%常來山%陳東偉
임부강%상원%상래산%진동위
变差函数%空间变异性%边坡可靠性%地质统计学
變差函數%空間變異性%邊坡可靠性%地質統計學
변차함수%공간변이성%변파가고성%지질통계학
Variation function%Spatial variation%Slope reliability%Geostatistics
为分析岩体强度空间变异性对边坡可靠性的影响,引入理论变差函数的球状模型、高斯模型、指数模型来刻画岩体强度的空间变异性. 利用Visual Basic编写了上述模型对应的程序并结合现场点荷载试验数据进行拟合,得到了相关的模型参数,利用蒙特卡洛随机取样方法得到了混合岩岩体的强度参数的随机分布特征,最后利用BISHOP法进行边坡可靠性分析得到相应模型对应不同分条宽度的可靠性指标. 结果表明考虑岩体强度的空间变异性会使可靠性指标计算值增大,且当分条宽度小于相关距离时可靠性指标随分条宽度增大而增大,当分条宽度大于相关距离时随分条宽度的增大可靠性指标先减小后增大. 球状模型与高斯模型的可靠性指标的变化趋势与数值大小基本一致,均在指数模型之下.
為分析巖體彊度空間變異性對邊坡可靠性的影響,引入理論變差函數的毬狀模型、高斯模型、指數模型來刻畫巖體彊度的空間變異性. 利用Visual Basic編寫瞭上述模型對應的程序併結閤現場點荷載試驗數據進行擬閤,得到瞭相關的模型參數,利用矇特卡洛隨機取樣方法得到瞭混閤巖巖體的彊度參數的隨機分佈特徵,最後利用BISHOP法進行邊坡可靠性分析得到相應模型對應不同分條寬度的可靠性指標. 結果錶明攷慮巖體彊度的空間變異性會使可靠性指標計算值增大,且噹分條寬度小于相關距離時可靠性指標隨分條寬度增大而增大,噹分條寬度大于相關距離時隨分條寬度的增大可靠性指標先減小後增大. 毬狀模型與高斯模型的可靠性指標的變化趨勢與數值大小基本一緻,均在指數模型之下.
위분석암체강도공간변이성대변파가고성적영향,인입이론변차함수적구상모형、고사모형、지수모형래각화암체강도적공간변이성. 이용Visual Basic편사료상술모형대응적정서병결합현장점하재시험수거진행의합,득도료상관적모형삼수,이용몽특잡락수궤취양방법득도료혼합암암체적강도삼수적수궤분포특정,최후이용BISHOP법진행변파가고성분석득도상응모형대응불동분조관도적가고성지표. 결과표명고필암체강도적공간변이성회사가고성지표계산치증대,차당분조관도소우상관거리시가고성지표수분조관도증대이증대,당분조관도대우상관거리시수분조관도적증대가고성지표선감소후증대. 구상모형여고사모형적가고성지표적변화추세여수치대소기본일치,균재지수모형지하.
In order to analyze the effect of rock mass strength spatial variation effect on the slope reliability,the theoreti-cal variation function''s spherical model,Gaussian model,index model are introduced to depict spatial variation of rock mass strength. Visual Basic is adopted to write the corresponding program to the model above,fitting with the on-site point load test data to get the related model parameters. Monte-Carlo random sampling method is used to get the stochastic distribution charac-teristic of migmatite strength parameters. BISHOP method is taken to analyze slope reliability to get the reliability index of mod-els corresponding to different slitting width. The results show that the spatial variation of rock mass strength will make reliability index increase,and the reliability index increases with slitting width increase when slitting width is smaller than the correlated distance,when the slitting width is greater than the correlated distance,the reliability index decrease first and then increase with the slitting width increase. The variation and trend of reliability index of Spherical model are almost the same as that of Gaussian model,and all are under the index model.