贵金属
貴金屬
귀금속
Precious Metals
2015年
z1期
20-26
,共7页
杜静%庄滇湘%孙绍霞%胡洁琼%谢明%张吉明%杨有才%王塞北
杜靜%莊滇湘%孫紹霞%鬍潔瓊%謝明%張吉明%楊有纔%王塞北
두정%장전상%손소하%호길경%사명%장길명%양유재%왕새북
复合材料%银包铜复合丝材%固/液浇注法%力学性能%退火工艺
複閤材料%銀包銅複閤絲材%固/液澆註法%力學性能%退火工藝
복합재료%은포동복합사재%고/액요주법%역학성능%퇴화공예
composite materials%silver covered copper composite wire%solid/liquid casting method%mechanical properties%annealing process
采用固/液浇注法制备了银包铜复合锭坯,经拉拔加工后,通过退火进行性能调控,制备出力学性能较好的银包铜复合细丝。研究了银包铜复合材料拉拔及退火工艺,以及工艺参数对组织和力学性能的影响规律。结果表明,随着变形量增加,Ag/Cu复合细丝极限抗拉强度是呈增加的趋势,而伸长率是随变形量增大而减小。退火后材料加工中产生的较大加工硬化得以消除,使其塑性提升,主要表现为强度下降、延伸率增大。
採用固/液澆註法製備瞭銀包銅複閤錠坯,經拉拔加工後,通過退火進行性能調控,製備齣力學性能較好的銀包銅複閤細絲。研究瞭銀包銅複閤材料拉拔及退火工藝,以及工藝參數對組織和力學性能的影響規律。結果錶明,隨著變形量增加,Ag/Cu複閤細絲極限抗拉彊度是呈增加的趨勢,而伸長率是隨變形量增大而減小。退火後材料加工中產生的較大加工硬化得以消除,使其塑性提升,主要錶現為彊度下降、延伸率增大。
채용고/액요주법제비료은포동복합정배,경랍발가공후,통과퇴화진행성능조공,제비출역학성능교호적은포동복합세사。연구료은포동복합재료랍발급퇴화공예,이급공예삼수대조직화역학성능적영향규률。결과표명,수착변형량증가,Ag/Cu복합세사겁한항랍강도시정증가적추세,이신장솔시수변형량증대이감소。퇴화후재료가공중산생적교대가공경화득이소제,사기소성제승,주요표현위강도하강、연신솔증대。
The silver covered copper composite ingot prepared by the solid/liquid casting method, and after drawing processing, through the annealing to adjustment the performance, prepared the silver covered copper composite fine wire with good mechanical properties. Study the influence law of drawing and annealing process and the technological parameters on the microstructure and mechanical properties of silver covered copper composite. The results show that with the increase of the deformation, the ultimate tensile strength of Ag/Cu composite fine wire is increasing, while the elongation decreases with increasing the deformation. After annealing the most of work hardening in material is eliminating, the plastic improved, the strength declined and elongation increased.