沈阳理工大学学报
瀋暘理工大學學報
침양리공대학학보
Transactions of Shenyang Ligong University
2015年
5期
62-65
,共4页
Al-Si合金%微观组织%切削性能%切削力%刀具磨损
Al-Si閤金%微觀組織%切削性能%切削力%刀具磨損
Al-Si합금%미관조직%절삭성능%절삭력%도구마손
Al-Si alloy%microstructure%machinability%cutting force%cutter wearing
研究过共晶Al-18Si%合金微观组织结构对其切削加工性能的影响,使用硬质合金刀具,在切削速度1000m/min下对化学成分相同但微观组织结构不同的Al-18Si%合金进行铣削加工实验.结果表明:经细化变质处理后,切削力幅值信号强度明显低于未细化材料,刀具使用寿命显著提高,加工过程相对平稳.未细化处理材料中粗大、形貌不规则的硬质初晶硅颗粒易导致刀具发生崩刃、剥落和粘着磨损等形式;具有细小、弥散而分布均匀的初晶硅合金表现出较好的切削性能.
研究過共晶Al-18Si%閤金微觀組織結構對其切削加工性能的影響,使用硬質閤金刀具,在切削速度1000m/min下對化學成分相同但微觀組織結構不同的Al-18Si%閤金進行鐉削加工實驗.結果錶明:經細化變質處理後,切削力幅值信號彊度明顯低于未細化材料,刀具使用壽命顯著提高,加工過程相對平穩.未細化處理材料中粗大、形貌不規則的硬質初晶硅顆粒易導緻刀具髮生崩刃、剝落和粘著磨損等形式;具有細小、瀰散而分佈均勻的初晶硅閤金錶現齣較好的切削性能.
연구과공정Al-18Si%합금미관조직결구대기절삭가공성능적영향,사용경질합금도구,재절삭속도1000m/min하대화학성분상동단미관조직결구불동적Al-18Si%합금진행선삭가공실험.결과표명:경세화변질처리후,절삭력폭치신호강도명현저우미세화재료,도구사용수명현저제고,가공과정상대평은.미세화처리재료중조대、형모불규칙적경질초정규과립역도치도구발생붕인、박락화점착마손등형식;구유세소、미산이분포균균적초정규합금표현출교호적절삭성능.