农机化研究
農機化研究
농궤화연구
Journal of Agricultural Mechanization Research
2016年
4期
165-169,179
,共6页
王英雪%赵立军%刘环宇%李强%周福君%何堤
王英雪%趙立軍%劉環宇%李彊%週福君%何隄
왕영설%조립군%류배우%리강%주복군%하제
小区旋耕机%自走式%参数优化
小區鏇耕機%自走式%參數優化
소구선경궤%자주식%삼수우화
rotary cultivator%self-propelled%parameters optimization
以小区自走式旋耕机为研究对象,对其结构组成及工作原理进行了分析,并针对玉米根茬地旋耕作业的要求,采用Box—Behnken 中心组合试验设计方法对玉米根茬地进行了较为详尽的田间试验。结果表明:当旋耕机前进速度为0.6m/s、刀轴转速为224r/min、刀齿齿数为11片时,旋耕深度达到13cm,玉米根茬破碎率达到95%以上,基本满足了小区作业要求。
以小區自走式鏇耕機為研究對象,對其結構組成及工作原理進行瞭分析,併針對玉米根茬地鏇耕作業的要求,採用Box—Behnken 中心組閤試驗設計方法對玉米根茬地進行瞭較為詳儘的田間試驗。結果錶明:噹鏇耕機前進速度為0.6m/s、刀軸轉速為224r/min、刀齒齒數為11片時,鏇耕深度達到13cm,玉米根茬破碎率達到95%以上,基本滿足瞭小區作業要求。
이소구자주식선경궤위연구대상,대기결구조성급공작원리진행료분석,병침대옥미근치지선경작업적요구,채용Box—Behnken 중심조합시험설계방법대옥미근치지진행료교위상진적전간시험。결과표명:당선경궤전진속도위0.6m/s、도축전속위224r/min、도치치수위11편시,선경심도체도13cm,옥미근치파쇄솔체도95%이상,기본만족료소구작업요구。
The the structure composition and working principle of a self-propelled rotary cultivator used in village .Box-Behnken central composite design method was employed to analyze the maize root crop field experiments of rotary tillage operation.Optimal parameters were obtained as the forward speed is 0.6m/s,rotary speed is 224r/min,blade teeth is 11 evaluation index to achieve the optimal rotary cultivator.Rotary tillage depth may reached 13cm, corn stubble root breakage rate of 95%which meets the basic requirement for residential area operation .