仪器仪表标准化与计量
儀器儀錶標準化與計量
의기의표표준화여계량
Instrument Standardization and Metrology
2015年
5期
42-44
,共3页
计量器具校准%温度测量%管理方法
計量器具校準%溫度測量%管理方法
계량기구교준%온도측량%관리방법
Measuring Instruments Calibration%Temperature Measurement%Management Methods
进行计量器具现场检定校准的时候,检定人员根据现场实际情况,不能完全按照规程规范操作,造成检定校准结果不准确。基于此,笔者结合实际情况,以温度计量为例,分析了温度计量过程中容易出现的问题,并给出了相应的解决措施,在此与同行间共同探讨。
進行計量器具現場檢定校準的時候,檢定人員根據現場實際情況,不能完全按照規程規範操作,造成檢定校準結果不準確。基于此,筆者結閤實際情況,以溫度計量為例,分析瞭溫度計量過程中容易齣現的問題,併給齣瞭相應的解決措施,在此與同行間共同探討。
진행계량기구현장검정교준적시후,검정인원근거현장실제정황,불능완전안조규정규범조작,조성검정교준결과불준학。기우차,필자결합실제정황,이온도계량위례,분석료온도계량과정중용역출현적문제,병급출료상응적해결조시,재차여동행간공동탐토。
For field calibration, gage verification personnel according to the actual situation, not completely in accordance with the procedures standardized operation, calibration result is not accurate. Based on this, the author combined with the actual situation, in the case of temperature measurement, analyzes the problems in the process of temperature measurement, and gives the corresponding solution measures, the members of study and discussion.