中国化工贸易
中國化工貿易
중국화공무역
China Chemical Trade
2015年
35期
44-45
,共2页
非接触式压电陶瓷微量喷射点胶技术%点胶精度%胶点直径%胶点高度%胶点重量
非接觸式壓電陶瓷微量噴射點膠技術%點膠精度%膠點直徑%膠點高度%膠點重量
비접촉식압전도자미량분사점효기술%점효정도%효점직경%효점고도%효점중량
non-contact piezoelectric ceramic micro jetting dispensing technology%dispensing accuracy%dispensing dot diameter%height%weight
为了进行非接触式压电陶瓷微量喷射点胶技术点胶精度的研究，必须寻找衡量点胶精度的标准，统一各个影响因素作为点胶技术精度测量的标准。因此对胶点的直径、高度、重量三个目标值分别进行点胶实验，得到何种目标值能作为点胶精度的测量标准。
為瞭進行非接觸式壓電陶瓷微量噴射點膠技術點膠精度的研究，必鬚尋找衡量點膠精度的標準，統一各箇影響因素作為點膠技術精度測量的標準。因此對膠點的直徑、高度、重量三箇目標值分彆進行點膠實驗，得到何種目標值能作為點膠精度的測量標準。
위료진행비접촉식압전도자미량분사점효기술점효정도적연구，필수심조형량점효정도적표준，통일각개영향인소작위점효기술정도측량적표준。인차대효점적직경、고도、중량삼개목표치분별진행점효실험，득도하충목표치능작위점효정도적측량표준。
For non-contact piezoelectric ceramic micro jetting dispensing technology,must find a way to measure the dispensing accuracy standard,unified al in fluence factors as dispensing technology precision measurement standards.The three targets of adhesive dot diameter,height,weight value dispensing experiment were conducted and what the target value as a standard for the measurement of the dispensing accuracy. <br> Non-contact type NORDSON EFD piezoelectric ceramic jetting valve PICO XMOD and Henkel UV9060F moisture dual curable adhesive experiment.Experiment of 30 psi pressure,the temperature of 25℃,9000mPa-s viscosity,0.3mm nozzle,500Hz dispensing frequency experiment.
