CAJ | 학술논문

针对秸秆环模式压块机的主要构件环模模具在使用中出现的磨损问题,对其进行优化处理.根据模具的工作原理,应用UG和ANSYS软件对模具进行建模与静力学分析,得出秸秆与模具应力与应变模拟分布情况.依据模拟结果,对模具进行4种组合的倒角分析,得到了不同倒角时模具与秸秆的应力与应变分布云图,分析了模具与秸秆接触间应力和应变趋势及与倒角变化之间的关系,并对优化前与优化后的模具进行疲劳分析,模拟出安全系数云图.结果表明:模具在使用过程中容易出现应力、应变集中现象,集中区域容易造成模具损坏;模具倒角处理后,发现应力、应变集中区域随着倒角半径的增大而分散;当倒角接近于圆形时模具优化效果最好,模具整体安全系数提高,具有较好的实用性能,为环模结构进一步优化提供了依据.
침대갈간배모식압괴궤적주요구건배모모구재사용중출현적마손문제,대기진행우화처리.근거모구적공작원리,응용UG화ANSYS연건대모구진행건모여정역학분석,득출갈간여모구응력여응변모의분포정황.의거모의결과,대모구진행4충조합적도각분석,득도료불동도각시모구여갈간적응력여응변분포운도,분석료모구여갈간접촉간응력화응변추세급여도각변화지간적관계,병대우화전여우화후적모구진행피로분석,모의출안전계수운도.결과표명:모구재사용과정중용역출현응력、응변집중현상,집중구역용역조성모구손배;모구도각처리후,발현응력、응변집중구역수착도각반경적증대이분산;당도각접근우원형시모구우화효과최호,모구정체안전계수제고,구유교호적실용성능,위배모결구진일보우화제공료의거.
In view of the straw stalk ring pattern briquetting machine primary member ring mold, the attrition question which appears in the use, carries on optimized processing to it.According to the mold principle of work, carries on the modelling and the statics analysis using UG and the ANSYS software to the mold, obtains the straw stalk and the mold stress and the strain simulation distributed situation.Based on the analogue result, carries on 4 kind of combinations to the mold the bevel edge analyses, obtained when the different bevel edge mold and straw stalk stress and strain distribu -ted cloud chart.Has analyzed the mold and the straw stalk contact the stress and the strain tendency as well as with the bevel edge change between relations before, and to optimizes carries on the fatigue analysis after the optimized mold, simulates the safety coefficient cloud chart.The result indicated that, the mold easy to appear the stress, the strain cen-tralism phenomenon in the use process, the centralized region easy to create the mold damage.After mold bevel edge pro-cessing, discovered the stress, the strain concentrate the region to increase along with the bevel edge radius disperse, when the bevel edge approaches in the circular the mold optimizes the effect to be best.The mold whole safety coefficient enhances, has the good practical performance, carried on the structure for the link mold further to optimize has provided the basis.