爆炸与冲击
爆炸與遲擊
폭작여충격
Explosion and Shock Waves
2015年
5期
763-767
,共5页
爆炸力学%环周分裂数%爆炸加载%柱壳%动态断裂%低碳钢
爆炸力學%環週分裂數%爆炸加載%柱殼%動態斷裂%低碳鋼
폭작역학%배주분렬수%폭작가재%주각%동태단렬%저탄강
mechanics of explosion%number of circumferential fragments%explosive loading%cylindrical shell%dynamic fracture%low-carbon steel
基于有限长度柱壳的Gurney速度公式,以壳体平均半径估算平均应变率,同时考虑壳体剪切断裂时的断裂面长度与径向壁厚的差异,对Grady-Kipp方法进行了修正,得到柱壳剪切断裂模式下环周分裂数的完整表达式.利用修正方法分析得到的环周分裂数计算结果与实验数据分析结果符合更好.以20号低碳钢柱壳为例,对其在TNT爆炸加载下的膨胀断裂进行了三维数值模拟,得到的环周分裂数模拟结果与实验结果符合较好.
基于有限長度柱殼的Gurney速度公式,以殼體平均半徑估算平均應變率,同時攷慮殼體剪切斷裂時的斷裂麵長度與徑嚮壁厚的差異,對Grady-Kipp方法進行瞭脩正,得到柱殼剪切斷裂模式下環週分裂數的完整錶達式.利用脩正方法分析得到的環週分裂數計算結果與實驗數據分析結果符閤更好.以20號低碳鋼柱殼為例,對其在TNT爆炸加載下的膨脹斷裂進行瞭三維數值模擬,得到的環週分裂數模擬結果與實驗結果符閤較好.
기우유한장도주각적Gurney속도공식,이각체평균반경고산평균응변솔,동시고필각체전절단렬시적단렬면장도여경향벽후적차이,대Grady-Kipp방법진행료수정,득도주각전절단렬모식하배주분렬수적완정표체식.이용수정방법분석득도적배주분렬수계산결과여실험수거분석결과부합경호.이20호저탄강주각위례,대기재TNT폭작가재하적팽창단렬진행료삼유수치모의,득도적배주분렬수모의결과여실험결과부합교호.