冶金能源
冶金能源
야금능원
Energy for Metallurgical Industry
2015年
6期
19-23
,共5页
华长旭%李宏%朱少楠%王耀
華長旭%李宏%硃少楠%王耀
화장욱%리굉%주소남%왕요
钢渣%烧结温度%抗折强度%吸水率
鋼渣%燒結溫度%抗摺彊度%吸水率
강사%소결온도%항절강도%흡수솔
steel slag%sintering temperature%flexural strength%water absorption rate
对钢渣粉料加压成型后的高温烧结产物的性能（吸水率、抗折强度、收缩率和体积密度）进行了研究。结果表明，成型压力、温度、烧结时间均对烧结样品的性能有一定影响。当成形压力为6MPa，烧结温度为1300℃，烧结时间为60min时，抗折强度达到70．02MPa，吸水率为1．68％。
對鋼渣粉料加壓成型後的高溫燒結產物的性能（吸水率、抗摺彊度、收縮率和體積密度）進行瞭研究。結果錶明，成型壓力、溫度、燒結時間均對燒結樣品的性能有一定影響。噹成形壓力為6MPa，燒結溫度為1300℃，燒結時間為60min時，抗摺彊度達到70．02MPa，吸水率為1．68％。
대강사분료가압성형후적고온소결산물적성능（흡수솔、항절강도、수축솔화체적밀도）진행료연구。결과표명，성형압력、온도、소결시간균대소결양품적성능유일정영향。당성형압력위6MPa，소결온도위1300℃，소결시간위60min시，항절강도체도70．02MPa，흡수솔위1．68％。
The sintered product properties of powder steel slag by compression molding, including wa-ter absorption rate, flexural strength, shrinking rate and volume density were studied.The result shows compact pressure, sintering temperature, heat preservation time have effect on the properties of the sin-tered samples.When the compact pressure is 6MPa, sintering temperature is 1300℃and heat preser-vation time is 60min, the flexural strength can reach 70.02MPa and the water absorption rate is 1.68%.
