工业水处理
工業水處理
공업수처리
Industrial Water Treatment
2015年
11期
86-88,108
,共4页
杨丽君%唐美华%张之翼%高亚茹%石成成%张建枚%金栋%陈国松
楊麗君%唐美華%張之翼%高亞茹%石成成%張建枚%金棟%陳國鬆
양려군%당미화%장지익%고아여%석성성%장건매%금동%진국송
总铁%工业用水%邻苯二酚紫%分光光度法%紫脲酸铵
總鐵%工業用水%鄰苯二酚紫%分光光度法%紫脲痠銨
총철%공업용수%린분이분자%분광광도법%자뇨산안
totaliron%industrial water%pyrocatechol violet%spectrophotometry%murexide
建立了一种适用于含锌工业用水中痕量总铁测定的分光光度方法.在pH=9.00的条件下,用紫脲酸铵掩蔽Zn2+,用邻苯二酚紫与Fe2+反应生成蓝色络合物,以预先用邻菲罗啉掩蔽了Fe2+的显色体系为参比,605 nm处的吸光度与样品溶液中0.02~0.6 mg/L的Fe2+呈良好的线性关系,灵敏度约为邻菲罗啉法的5倍,检出限0.012 mg/L,加标回收率97.0%~100%,相对标准偏差1.16%.方法具有较高的灵敏度、准确度和重现性.
建立瞭一種適用于含鋅工業用水中痕量總鐵測定的分光光度方法.在pH=9.00的條件下,用紫脲痠銨掩蔽Zn2+,用鄰苯二酚紫與Fe2+反應生成藍色絡閤物,以預先用鄰菲囉啉掩蔽瞭Fe2+的顯色體繫為參比,605 nm處的吸光度與樣品溶液中0.02~0.6 mg/L的Fe2+呈良好的線性關繫,靈敏度約為鄰菲囉啉法的5倍,檢齣限0.012 mg/L,加標迴收率97.0%~100%,相對標準偏差1.16%.方法具有較高的靈敏度、準確度和重現性.
건립료일충괄용우함자공업용수중흔량총철측정적분광광도방법.재pH=9.00적조건하,용자뇨산안엄폐Zn2+,용린분이분자여Fe2+반응생성람색락합물,이예선용린비라람엄폐료Fe2+적현색체계위삼비,605 nm처적흡광도여양품용액중0.02~0.6 mg/L적Fe2+정량호적선성관계,령민도약위린비라람법적5배,검출한0.012 mg/L,가표회수솔97.0%~100%,상대표준편차1.16%.방법구유교고적령민도、준학도화중현성.
A spectrophotometry method suitable for the determination of trace total iron in industrial water containing Zn2+has been established.In the buffer solution when pH=9.00,murexide is used for masking Zn2+and the reaction of pyrocatechol violet with Fe2+forms a blue complex.Taking the chromagenic system whose Fe2+has been masked by phenanthroline as reference solution,it is found that there is a good linear relationship between the absorbance of 605 nm and Fe2+whose concentration is in the range of 0.02-0.6 mg/L in the sample solution.Meanwhile,the sensitivity of pyrocatechol violet spectrophotometry is about 5 times as much as that of phenanthroline spectrophotometry,detection limit is 0.012 mg/L,standard recovery rates are from 97% to 100%,and relative standard deviation is 1.16%.The results indicate that the method has superior sensitivity,accuracy and reproducibility.