吉林大学学报(地球科学版)
吉林大學學報(地毬科學版)
길림대학학보(지구과학판)
Journal of Jilin University (Earth Science Edition)
2015年
6期
1846-1854
,共9页
孟庆奎%林品荣%李勇%李建华%朱宏伟%李荡
孟慶奎%林品榮%李勇%李建華%硃宏偉%李盪
맹경규%림품영%리용%리건화%주굉위%리탕
张量 CSAM T%坐标旋转%Mohr 圆%示范应用
張量 CSAM T%坐標鏇轉%Mohr 圓%示範應用
장량 CSAM T%좌표선전%Mohr 원%시범응용
tensor CSAM T%coordinate rotation%Mohr circle%demonstration application
面对大深度和三维探测,标量 CSAM T (controlled source audio frequency magnetotellurics)已显力不从心,而张量 CSAM T 正逐渐成为研究热点。在前人研究基础上,笔者就张量 CSAM T 数据处理方面提出 Mohr 圆分析和传统坐标旋转两种处理技术,并首次创新性地使用我国自主研发的综合电法仪开展了张量 CSAM T 示范应用。结果表明:Mohr 圆分析和传统坐标旋转法相结合应用效果良好,可定性挖掘地下地质体的纵向和横向构造特征,主轴方位的视电阻率和阻抗相位与目标体对应良好,并且电阻率反演结果与钻孔等地质资料综合分析对建立试验区的地质地球物理模型是有益的。
麵對大深度和三維探測,標量 CSAM T (controlled source audio frequency magnetotellurics)已顯力不從心,而張量 CSAM T 正逐漸成為研究熱點。在前人研究基礎上,筆者就張量 CSAM T 數據處理方麵提齣 Mohr 圓分析和傳統坐標鏇轉兩種處理技術,併首次創新性地使用我國自主研髮的綜閤電法儀開展瞭張量 CSAM T 示範應用。結果錶明:Mohr 圓分析和傳統坐標鏇轉法相結閤應用效果良好,可定性挖掘地下地質體的縱嚮和橫嚮構造特徵,主軸方位的視電阻率和阻抗相位與目標體對應良好,併且電阻率反縯結果與鑽孔等地質資料綜閤分析對建立試驗區的地質地毬物理模型是有益的。
면대대심도화삼유탐측,표량 CSAM T (controlled source audio frequency magnetotellurics)이현력불종심,이장량 CSAM T 정축점성위연구열점。재전인연구기출상,필자취장량 CSAM T 수거처리방면제출 Mohr 원분석화전통좌표선전량충처리기술,병수차창신성지사용아국자주연발적종합전법의개전료장량 CSAM T 시범응용。결과표명:Mohr 원분석화전통좌표선전법상결합응용효과량호,가정성알굴지하지질체적종향화횡향구조특정,주축방위적시전조솔화조항상위여목표체대응량호,병차전조솔반연결과여찬공등지질자료종합분석대건립시험구적지질지구물리모형시유익적。
Scalar CASM T is inadequate to the face of great depth and three‐dimensional detection ;while tensor CSAM T is becoming a research focus .On the basis of previous studies ,two kinds of tensor CSAM T processing technologies are proposed ;which are Mohr analysis and the traditional coordinate rotation .By innovative use of the integrated electrical instruments developed in China for the first time , we demonstrate the application of tensor CSAM T .The results show that through Mohr analysis and traditional coordinate rotation ,the vertical and horizontal structure of underground geological bodies can be qualitatively analyzed ; apparent resistivity and impedance phase in principal axis orientation correspond with the targets ; and the comprehensive analysis of resistivity inversion and drilling information are profitable for the establishment of geological‐geophysical models on the test area .