石油炼制与化工
石油煉製與化工
석유련제여화공
Petroleum Processing and Petrochemicals
2015年
12期
47-52
,共6页
丙烯%提升管反应器%集总%动力学模型%参数估计
丙烯%提升管反應器%集總%動力學模型%參數估計
병희%제승관반응기%집총%동역학모형%삼수고계
propylene%riser reactor%lump%kinetic model%parameter estimation
针对两段提升管催化裂解多产丙烯(TMP)工艺,在催化反应机理和 TMP 工艺特点的指导下,将反应体系划分成重油、柴油、汽油中的烯烃、汽油中的芳烃、汽油中的饱和烃、(丙烷+丁烷)、丁烯、丙烯、干气和焦炭共十个集总,建立了 TMP 工艺十集总动力学模型,并采用模拟退火法(全局)-最小二乘法(局部)-模拟退火法(局部)三层逐层寻优方法进行了参数估计。研究结果表明,TMP 工艺十集总动力学模型可用来分析 TMP 工艺各产物分布规律,并考察操作条件对装置的影响,给装置操作优化提供指导。
針對兩段提升管催化裂解多產丙烯(TMP)工藝,在催化反應機理和 TMP 工藝特點的指導下,將反應體繫劃分成重油、柴油、汽油中的烯烴、汽油中的芳烴、汽油中的飽和烴、(丙烷+丁烷)、丁烯、丙烯、榦氣和焦炭共十箇集總,建立瞭 TMP 工藝十集總動力學模型,併採用模擬退火法(全跼)-最小二乘法(跼部)-模擬退火法(跼部)三層逐層尋優方法進行瞭參數估計。研究結果錶明,TMP 工藝十集總動力學模型可用來分析 TMP 工藝各產物分佈規律,併攷察操作條件對裝置的影響,給裝置操作優化提供指導。
침대량단제승관최화렬해다산병희(TMP)공예,재최화반응궤리화 TMP 공예특점적지도하,장반응체계화분성중유、시유、기유중적희경、기유중적방경、기유중적포화경、(병완+정완)、정희、병희、간기화초탄공십개집총,건립료 TMP 공예십집총동역학모형,병채용모의퇴화법(전국)-최소이승법(국부)-모의퇴화법(국부)삼층축층심우방법진행료삼수고계。연구결과표명,TMP 공예십집총동역학모형가용래분석 TMP 공예각산물분포규률,병고찰조작조건대장치적영향,급장치조작우화제공지도。
According to the catalytic reaction mechanisms and the more propylene demands,a ten lumped kinetic model was proposed for the TMP process. The feedstock and products were divided into ten lumps,including heavy oil,diesel,gasoline olefins,gasoline aromatics,gasoline saturates,(butane+propane),butylene,propylene,dry gas and coke. The three layered optimization method of simula-ted annealing (global)-least squares (local)-simulated annealing method (local)was used to estimate the parameters. It is found that the model could predict reasonably the products distribution and their com-positions,and also the effect of operation parameters of TMP process on FCCU;thereby it could bring guidelines for optimization of the TMP process.