鞍钢技术
鞍鋼技術
안강기술
Angang Technology
2015年
6期
11-15
,共5页
周明顺%韩淑峰%徐礼兵%宫作岩%刘沛江
週明順%韓淑峰%徐禮兵%宮作巖%劉沛江
주명순%한숙봉%서례병%궁작암%류패강
烧结%二次混合%圆盘制粒%圆筒制粒%冶金性能
燒結%二次混閤%圓盤製粒%圓筒製粒%冶金性能
소결%이차혼합%원반제립%원통제립%야금성능
sintering%secondary blending%granulating by disc%granulating by drum%met-allurgical property
针对鞍钢炼铁总厂三烧车间烧结矿质量差问题,对圆盘混合机与圆筒混合机制粒对烧结矿成分稳定性的影响进行了对比分析。结果表明,圆盘混合机的混匀效果比圆筒混合机差是三烧车间烧结矿质量差的直接原因。由圆盘改成圆筒后,烧结矿碱度稳定率提高6.3个百分点,TFe稳定率提高2.94个百分点,FeO稳定率提高0.95个百分点,烧结固体燃耗降低4 kg/t,烧结矿冶金性能改善,高炉生产稳定顺行、焦比降低。
針對鞍鋼煉鐵總廠三燒車間燒結礦質量差問題,對圓盤混閤機與圓筒混閤機製粒對燒結礦成分穩定性的影響進行瞭對比分析。結果錶明,圓盤混閤機的混勻效果比圓筒混閤機差是三燒車間燒結礦質量差的直接原因。由圓盤改成圓筒後,燒結礦堿度穩定率提高6.3箇百分點,TFe穩定率提高2.94箇百分點,FeO穩定率提高0.95箇百分點,燒結固體燃耗降低4 kg/t,燒結礦冶金性能改善,高爐生產穩定順行、焦比降低。
침대안강련철총엄삼소차간소결광질량차문제,대원반혼합궤여원통혼합궤제립대소결광성분은정성적영향진행료대비분석。결과표명,원반혼합궤적혼균효과비원통혼합궤차시삼소차간소결광질량차적직접원인。유원반개성원통후,소결광감도은정솔제고6.3개백분점,TFe은정솔제고2.94개백분점,FeO은정솔제고0.95개백분점,소결고체연모강저4 kg/t,소결광야금성능개선,고로생산은정순행、초비강저。
With regard to the poor quality of sinter prepared by No.3 Sintering Workshop of General Ironmaking Plant of Angang Steel Co., Ltd., the comparative analysis of the influence of the granulating operations by both the disc mixer and the drum mixer on the stability of compositions in sinter was done. The analytical results show that the blending efficiency by the disc mixer is worse than that by the drum mixer, which is the immediate cause leading to the poor quality of sinter prepared by No.3 Sintering Workshop. So the disc mixer is replaced by the drum mixer, the stability factor of the sinter basicity is increased by 6.3 percentage points, total iron increased by 2.94 percentage points and FeO increased by 0.95 percentage points while the consumption of solid fuel for sintering is decreased by 4 kg/t, the metallurgical properties of the sinter is improved, the operation of the blast furnace is stable and smooth while the coke ratio is decreased.