针织工业
針織工業
침직공업
Knitting Industries
2015年
10期
14-16
,共3页
武琼琳%陈振宏%石宝%郝傲松%张威
武瓊琳%陳振宏%石寶%郝傲鬆%張威
무경림%진진굉%석보%학오송%장위
聚苯硫醚纤维%不锈钢纤维%混纺纱%功能性指标%热湿舒适性%灰色聚类分析
聚苯硫醚纖維%不鏽鋼纖維%混紡紗%功能性指標%熱濕舒適性%灰色聚類分析
취분류미섬유%불수강섬유%혼방사%공능성지표%열습서괄성%회색취류분석
Polyphenylene Sulfide Fiber%Stainless Steel Fiber%Blended Yarn%Functional Index%Heat-mois-ture Comfort%Grey Clustering Analysis
基于聚苯硫醚和不锈钢纤维及其混纺纱的性能特点,本文采用具有6种混纺比的聚苯硫醚、不锈钢混纺纱线在电脑横机上编织6款纬平针组织面料. 分别对6款面料的抗静电性能、阻燃性能和防辐射性能等功能性指标进行测试与对比分析,同时采用灰色聚类分析方法对织物的热湿舒适性能进行综合评价. 结果表明,不锈钢纤维含量为25%时,面料抗静电性能已远高于国家A级标准的要求;不锈钢含量越大,面料阻燃性能越好;不锈钢纤维含量为2.4%时,面料防辐射性能可达到B级标准的要求;在满足面料功能性要求的基础上,不锈钢纤维的含量应偏低掌握. 该研究为开发复合功能性针织面料提供参考.
基于聚苯硫醚和不鏽鋼纖維及其混紡紗的性能特點,本文採用具有6種混紡比的聚苯硫醚、不鏽鋼混紡紗線在電腦橫機上編織6款緯平針組織麵料. 分彆對6款麵料的抗靜電性能、阻燃性能和防輻射性能等功能性指標進行測試與對比分析,同時採用灰色聚類分析方法對織物的熱濕舒適性能進行綜閤評價. 結果錶明,不鏽鋼纖維含量為25%時,麵料抗靜電性能已遠高于國傢A級標準的要求;不鏽鋼含量越大,麵料阻燃性能越好;不鏽鋼纖維含量為2.4%時,麵料防輻射性能可達到B級標準的要求;在滿足麵料功能性要求的基礎上,不鏽鋼纖維的含量應偏低掌握. 該研究為開髮複閤功能性針織麵料提供參攷.
기우취분류미화불수강섬유급기혼방사적성능특점,본문채용구유6충혼방비적취분류미、불수강혼방사선재전뇌횡궤상편직6관위평침조직면료. 분별대6관면료적항정전성능、조연성능화방복사성능등공능성지표진행측시여대비분석,동시채용회색취류분석방법대직물적열습서괄성능진행종합평개. 결과표명,불수강섬유함량위25%시,면료항정전성능이원고우국가A급표준적요구;불수강함량월대,면료조연성능월호;불수강섬유함량위2.4%시,면료방복사성능가체도B급표준적요구;재만족면료공능성요구적기출상,불수강섬유적함량응편저장악. 해연구위개발복합공능성침직면료제공삼고.
Based on the performance of polyphenylene sulfide and stainless steel fibers and their blended yarns, the paper develops 6 kinds of plain knitted fabrics with 6 different blending ratios of polyphenylene sulfide and stainless steel yarns on computerized flat knitting machine. It also tests and analyzes the functional indices of the fabrics such as antistatic, flame retardant and anti-radiation properties, and comprehensively evaluates the heat-moisture comfort properties of fabrics by gray cluster analysis. The results show that when the content of stainless steel fiber reaches 25%, the antistatic property is much higher than that of the national level A; the higher the content of stainless steel, the better the flame retardation property of the fabric; when the content of the stainless steel fiber reaches 2.4%, the anti-radiation property may reach the national level B; on the basis of meeting the functional requirements of fabrics, the content of stainless steel fiber should be low. The research can provide a certain reference for the development of composite functional knitted fabrics.