非金属矿
非金屬礦
비금속광
Non-Metallic Mines
2015年
6期
50-52
,共3页
低模数水玻璃%吸油值%粒径%孔隙直径
低模數水玻璃%吸油值%粒徑%孔隙直徑
저모수수파리%흡유치%립경%공극직경
low modulus water glass%oil adsorption value%particle size%pore diameter
为提高煤矸石废弃物的综合利用,通过工业水玻璃加碱后制备的水玻璃模拟酸渣-硫酸钠合成的低模数水玻璃,在接近石灰窑尾气CO2体积分数下,采用碳化法制备白炭黑.本实验考察了反应温度、反应物体积分数和电解质对吸油值的影响,以获得符合国家吸油值标准2.0~3.5 mL/g的白炭黑产品.通过SEM,化学吸附分析仪,激光粒度仪等手段对产品进行表征,探明产品形貌、粒度等与吸油值的关系.结果表明:粒径与吸油值呈负相关,90℃粒径达到最小值7.34 μm,吸油值达到最大值3.538 ml/g.水玻璃体积分数影响产品粒径,V(水)/V(水玻璃)在0~2,颗粒粒径与硅酸钠体积分数正相关.70℃时,加入电解质,孔体积增大,结构变得疏松,吸油值增大至3.343 mL/g.通过控制反应条件,可以制得满足国标要求的白炭黑产品.
為提高煤矸石廢棄物的綜閤利用,通過工業水玻璃加堿後製備的水玻璃模擬痠渣-硫痠鈉閤成的低模數水玻璃,在接近石灰窯尾氣CO2體積分數下,採用碳化法製備白炭黑.本實驗攷察瞭反應溫度、反應物體積分數和電解質對吸油值的影響,以穫得符閤國傢吸油值標準2.0~3.5 mL/g的白炭黑產品.通過SEM,化學吸附分析儀,激光粒度儀等手段對產品進行錶徵,探明產品形貌、粒度等與吸油值的關繫.結果錶明:粒徑與吸油值呈負相關,90℃粒徑達到最小值7.34 μm,吸油值達到最大值3.538 ml/g.水玻璃體積分數影響產品粒徑,V(水)/V(水玻璃)在0~2,顆粒粒徑與硅痠鈉體積分數正相關.70℃時,加入電解質,孔體積增大,結構變得疏鬆,吸油值增大至3.343 mL/g.通過控製反應條件,可以製得滿足國標要求的白炭黑產品.
위제고매안석폐기물적종합이용,통과공업수파리가감후제비적수파리모의산사-류산납합성적저모수수파리,재접근석회요미기CO2체적분수하,채용탄화법제비백탄흑.본실험고찰료반응온도、반응물체적분수화전해질대흡유치적영향,이획득부합국가흡유치표준2.0~3.5 mL/g적백탄흑산품.통과SEM,화학흡부분석의,격광립도의등수단대산품진행표정,탐명산품형모、립도등여흡유치적관계.결과표명:립경여흡유치정부상관,90℃립경체도최소치7.34 μm,흡유치체도최대치3.538 ml/g.수파리체적분수영향산품립경,V(수)/V(수파리)재0~2,과립립경여규산납체적분수정상관.70℃시,가입전해질,공체적증대,결구변득소송,흡유치증대지3.343 mL/g.통과공제반응조건,가이제득만족국표요구적백탄흑산품.