国际纺织导报
國際紡織導報
국제방직도보
Melliand-China
2015年
10期
60-65,70
,共7页
聚四氟乙烯%中空%管式膜%异氰酸酯%过滤
聚四氟乙烯%中空%管式膜%異氰痠酯%過濾
취사불을희%중공%관식막%이청산지%과려
polytetrafluoroethylene%hollow%tubular membrane%polyisocyanate%filtration
为制备管式中空聚四氟乙烯纤维膜，探究了管式多层膜的结构特征。采用宽16.0 mm、厚0.2 mm的聚四氟乙烯纤维膜原膜进行包缠烧结，制备了管式中空聚四氟乙烯纤维膜。通过红外光谱和3D 激光显微镜，测试了原膜宽度(16.0~64.0 mm)、包缠层数(6~12层)及添加剂(封闭型异氰酸酯)等不同因素对所制备的管式中空聚四氟乙烯纤维膜的影响。结果表明：通过包缠烧结制备的管式中空聚四氟乙烯纤维膜孔隙率高、整体均匀性好、孔隙相通性好，具有较好的过滤性能。
為製備管式中空聚四氟乙烯纖維膜，探究瞭管式多層膜的結構特徵。採用寬16.0 mm、厚0.2 mm的聚四氟乙烯纖維膜原膜進行包纏燒結，製備瞭管式中空聚四氟乙烯纖維膜。通過紅外光譜和3D 激光顯微鏡，測試瞭原膜寬度(16.0~64.0 mm)、包纏層數(6~12層)及添加劑(封閉型異氰痠酯)等不同因素對所製備的管式中空聚四氟乙烯纖維膜的影響。結果錶明：通過包纏燒結製備的管式中空聚四氟乙烯纖維膜孔隙率高、整體均勻性好、孔隙相通性好，具有較好的過濾性能。
위제비관식중공취사불을희섬유막，탐구료관식다층막적결구특정。채용관16.0 mm、후0.2 mm적취사불을희섬유막원막진행포전소결，제비료관식중공취사불을희섬유막。통과홍외광보화3D 격광현미경，측시료원막관도(16.0~64.0 mm)、포전층수(6~12층)급첨가제(봉폐형이청산지)등불동인소대소제비적관식중공취사불을희섬유막적영향。결과표명：통과포전소결제비적관식중공취사불을희섬유막공극솔고、정체균균성호、공극상통성호，구유교호적과려성능。
The structure characteristics were explored for preparation of tubular hollow polytetrafluoroethylene ( PTFE ) fiber membrance. The original of PTFE fiber membrane ( width 16. 0 mm, thickness 0. 2 mm) was prepared into tubular hollow PTFE fiber membrane by wrapped and sintered. The influence of different factors on tubular hollow fiber membrane of the PTFE, including the width of the original film (16. 0 ~64. 0 mm), wrapped layers (6~12 ) , and the addition of additives ( blocking isocyanate ) were examined by infrared spectrum and 3D laser microscope. Result shows that the PTFE tubular hollow fiber membrane by wrapped and sintered has high porosity, overall uniformity, good connectivity of porosity, and a good filtration performance.
