电气传动自动化
電氣傳動自動化
전기전동자동화
Electrical Drive Automation
2015年
6期
40-42
,共3页
环轨%冶金葫芦%吊运系统
環軌%冶金葫蘆%弔運繫統
배궤%야금호호%조운계통
ring rail%metallurgical hoist%lifting system
针对传统起重机以手动控制为主，动作效率低，稳定性差，安全性不高，易导致事故发生等问题，结合实际检验工作，研究并设计一种基于环形轨道的冶金葫芦自动吊运系统。该系统通过PLC控制有效地提高了系统的自动化程度，在节能的基础上有效地提高了现场工作效率，保证了设备的安全性和稳定性，大大降低特种设备的事故率。
針對傳統起重機以手動控製為主，動作效率低，穩定性差，安全性不高，易導緻事故髮生等問題，結閤實際檢驗工作，研究併設計一種基于環形軌道的冶金葫蘆自動弔運繫統。該繫統通過PLC控製有效地提高瞭繫統的自動化程度，在節能的基礎上有效地提高瞭現場工作效率，保證瞭設備的安全性和穩定性，大大降低特種設備的事故率。
침대전통기중궤이수동공제위주，동작효솔저，은정성차，안전성불고，역도치사고발생등문제，결합실제검험공작，연구병설계일충기우배형궤도적야금호호자동조운계통。해계통통과PLC공제유효지제고료계통적자동화정도，재절능적기출상유효지제고료현장공작효솔，보증료설비적안전성화은정성，대대강저특충설비적사고솔。
The traditional crane is manually control-oriented with low operational efficiency, poor stability and low security. It easily leads to accidents and other problems. Combined with the actual inspection work, The metallurgical hoist automatic lifting system based on the ring rail is researched and designed. The system is controlled by PLC to effectively improve the automation degree of the system. In the meanwhile, on the basis of the energy saving, the working efficiency, the security and the stability of the system are effectively improved, and the accident rate of the special equipment is greatly reduced.
