CAJ | 학술논문

针对变流器的控制系统，提出了基于ARM的直接转矩控制方式。对铣磨车变流器进行硬件设计和软件设计；ARM控制系统主要由采集模块、电源模块、存储单元等组成，检测机车的温度、压力等信号，并与DSP进行通讯，来实现对铣磨车变流器的控制。实验证明，该控制系统能实时监测机车的运行情况，记录各设备的温度和压力值。
침대변류기적공제계통，제출료기우ARM적직접전구공제방식。대선마차변류기진행경건설계화연건설계；ARM공제계통주요유채집모괴、전원모괴、존저단원등조성，검측궤차적온도、압력등신호，병여DSP진행통신，래실현대선마차변류기적공제。실험증명，해공제계통능실시감측궤차적운행정황，기록각설비적온도화압력치。
In view of the converter control system, puts forward the direct torque control method based on ARM. The hardware and software of the converter for milling machine are designed; ARM control system is mainly composed of acquisition module, power module and memory unit, etc., and ARM processor detects the temperature and pressure signals of the locomotive and communicates with the DSP to control the milling machine converter. Experiments show that the control system is capable of real-time monitoring the locomotive operation and recording the temperature and pressure value of each device.