常州工学院学报
常州工學院學報
상주공학원학보
Journal of Changzhou Institute of Technology
2015年
5期
47-52
,共6页
印染废水%稳定达标%运行控制
印染廢水%穩定達標%運行控製
인염폐수%은정체표%운행공제
printing and dyeing wastewater%stable and standard%operational control
苏南某经济开发区污水处理厂处理以印染废水为主的工业废水,主体处理工艺为"混凝初沉—厌氧水解—A/O—混凝沉淀",该工艺可以有效去除废水中的绝大部分污染物,但不能实现稳定达标排放. 文章从运行现状和处理工艺出发,对该污水处理厂存在问题进行分析,并提出相应对策.
囌南某經濟開髮區汙水處理廠處理以印染廢水為主的工業廢水,主體處理工藝為"混凝初沉—厭氧水解—A/O—混凝沉澱",該工藝可以有效去除廢水中的絕大部分汙染物,但不能實現穩定達標排放. 文章從運行現狀和處理工藝齣髮,對該汙水處理廠存在問題進行分析,併提齣相應對策.
소남모경제개발구오수처리엄처리이인염폐수위주적공업폐수,주체처리공예위"혼응초침—염양수해—A/O—혼응침정",해공예가이유효거제폐수중적절대부분오염물,단불능실현은정체표배방. 문장종운행현상화처리공예출발,대해오수처리엄존재문제진행분석,병제출상응대책.
A sewage treatment plant at an economic development zone in the south of Jiangsu is oriented to printing and dyeing wastewater treatment.The wastewater treatment technique for printing and dyeing wastewater in use was a process of preliminary coagulation sedimentation anaerobic hydrolysis A/O coagulation sedimentation.This technique could effectively remove the vast majority of pollutants in wastewater,but the effluent quality could not steadily meet the discharge standard.This article analyses prob-lems of the sewage treatment plant from the operating status and the technique,and proposes suggestions.