现代电子技术
現代電子技術
현대전자기술
MODERN ELECTRONICS TECHNIQUE
2014年
3期
117-121
,共5页
多芯片组件%Fourier%Non-Fourier%有限差分法
多芯片組件%Fourier%Non-Fourier%有限差分法
다심편조건%Fourier%Non-Fourier%유한차분법
MCM%Fourier%Non-Fourier%FDM
随着电子产品的尺寸和重量日趋变小,经典Fourier理论已经不能很好地解决实际问题。为了使理论结果尽可能准确地反映实际情况,需要用到Non-Fourier导热模型。首先,建立了三维多芯片组件的Fourier和Non-Fourier导热模型;其次,采用有限差分方法求解相应模型的传热方程,得到了温度分布和温度响应;最后,使用有限元热分析软件ICEPAK建立了相应的热分析模型并进行计算。实验结果表明,与经典的Fourier模型相比,Non-Fourier模型更加接近实际温度,且温度场进入稳态的时间较长,热耦合的现象也更强。
隨著電子產品的呎吋和重量日趨變小,經典Fourier理論已經不能很好地解決實際問題。為瞭使理論結果儘可能準確地反映實際情況,需要用到Non-Fourier導熱模型。首先,建立瞭三維多芯片組件的Fourier和Non-Fourier導熱模型;其次,採用有限差分方法求解相應模型的傳熱方程,得到瞭溫度分佈和溫度響應;最後,使用有限元熱分析軟件ICEPAK建立瞭相應的熱分析模型併進行計算。實驗結果錶明,與經典的Fourier模型相比,Non-Fourier模型更加接近實際溫度,且溫度場進入穩態的時間較長,熱耦閤的現象也更彊。
수착전자산품적척촌화중량일추변소,경전Fourier이론이경불능흔호지해결실제문제。위료사이론결과진가능준학지반영실제정황,수요용도Non-Fourier도열모형。수선,건립료삼유다심편조건적Fourier화Non-Fourier도열모형;기차,채용유한차분방법구해상응모형적전열방정,득도료온도분포화온도향응;최후,사용유한원열분석연건ICEPAK건립료상응적열분석모형병진행계산。실험결과표명,여경전적Fourier모형상비,Non-Fourier모형경가접근실제온도,차온도장진입은태적시간교장,열우합적현상야경강。
With the reduction in size and weight of electronic products,classical Fourier theory can′t solve practical prob-lems well. To make the theoretical results close to the fact,Non-Fourier model should be used. Firstly,the Fourier model and the Non-Fourier model for three-dimension multi-chip module(MCM)are built separately. Secondly,finite difference method (FDM) is used to solve the corresponding equation of heat transfer and get distribution and response of temperature. Finally, the relevant thermoanalysis model is built up by finite element analysis software of ICEPAK and calculated. The result shows that the temperature of Non-Fourier model is closer to the practical situation than classical Fourier model. The time is longer for temperature field to enter the stable state,and the thermo-coupled phenomenon is stronger.