价值工程
價值工程
개치공정
VALUE ENGINEERING
2014年
21期
42-43
,共2页
加热炉%温度控制%炉温优化
加熱爐%溫度控製%爐溫優化
가열로%온도공제%로온우화
heating furnace%temperature control%temperature optimization
加热炉是轧线上最重要的设备之一，它的作用是把板坯加热到轧制所需要的温度。加热炉控制的目的是设定加热炉燃烧段炉温，使板坯在炉内充分受热，出炉时使其温度和均匀度能满足轧制要求，同时又要使所消耗的燃料尽量小。故温度控制能直接影响到加热炉的能耗和轧制设备寿命、钢坯成材率、最终钢材产品质量以及整个轧线的有效作业率。
加熱爐是軋線上最重要的設備之一，它的作用是把闆坯加熱到軋製所需要的溫度。加熱爐控製的目的是設定加熱爐燃燒段爐溫，使闆坯在爐內充分受熱，齣爐時使其溫度和均勻度能滿足軋製要求，同時又要使所消耗的燃料儘量小。故溫度控製能直接影響到加熱爐的能耗和軋製設備壽命、鋼坯成材率、最終鋼材產品質量以及整箇軋線的有效作業率。
가열로시알선상최중요적설비지일，타적작용시파판배가열도알제소수요적온도。가열로공제적목적시설정가열로연소단로온，사판배재로내충분수열，출로시사기온도화균균도능만족알제요구，동시우요사소소모적연료진량소。고온도공제능직접영향도가열로적능모화알제설비수명、강배성재솔、최종강재산품질량이급정개알선적유효작업솔。
Heating furnace is one of the most important equipment of the rolling line, whose function is to heat the slab till the required rolling temperature. The purpose of furnace control is to set the temperature of the combustion section of the furnace to make the slab heat fully in the furnace and its temperature and uniformity meet the rolling requirement when finishing heating and at the same time to make the fuel consumed as little as possible. So temperature control can directly affect the energy consumption of heating furnace and the service life of the rolling equipment, billet yield and quality of final steel products as well as the operation efficiency of the whole rolling line.
