价值工程
價值工程
개치공정
VALUE ENGINEERING
2013年
15期
123-125
,共3页
软土层%特性%动剪切模量比%阻尼比
軟土層%特性%動剪切模量比%阻尼比
연토층%특성%동전절모량비%조니비
soft soil%characteristic%dynamical shear modulus ratio%damping ratio
通过对杭州地区典型软土层(第一、第二软土层)土质力学特性、动剪切模量比和阻尼比的分析,详细探讨了杭州地区第一、第二软土层压缩指标、抗剪强度指标与物理指标之间的分布规律和相关性,拟合了相应的经验回归公式.通过试验发现了第一、第二软土层动剪切模量比 G/Gmax、阻尼比姿与剪切应变酌之间的关系,并利用 Martin-davidenkov 模型和陈国兴等建议的阻尼比经验公式进行了验证和拟合,给出了拟合曲线和拟合参数推荐值,从而得到小应变条件下,杭州地区软土层动剪切模量比 G/Gmax 和阻尼比姿随剪切应变酌变化的参考值,有利于杭州地区第一、第二软土层动力特性的认识,可供实际工程借鉴使用.
通過對杭州地區典型軟土層(第一、第二軟土層)土質力學特性、動剪切模量比和阻尼比的分析,詳細探討瞭杭州地區第一、第二軟土層壓縮指標、抗剪彊度指標與物理指標之間的分佈規律和相關性,擬閤瞭相應的經驗迴歸公式.通過試驗髮現瞭第一、第二軟土層動剪切模量比 G/Gmax、阻尼比姿與剪切應變酌之間的關繫,併利用 Martin-davidenkov 模型和陳國興等建議的阻尼比經驗公式進行瞭驗證和擬閤,給齣瞭擬閤麯線和擬閤參數推薦值,從而得到小應變條件下,杭州地區軟土層動剪切模量比 G/Gmax 和阻尼比姿隨剪切應變酌變化的參攷值,有利于杭州地區第一、第二軟土層動力特性的認識,可供實際工程藉鑒使用.
통과대항주지구전형연토층(제일、제이연토층)토질역학특성、동전절모량비화조니비적분석,상세탐토료항주지구제일、제이연토층압축지표、항전강도지표여물리지표지간적분포규률화상관성,의합료상응적경험회귀공식.통과시험발현료제일、제이연토층동전절모량비 G/Gmax、조니비자여전절응변작지간적관계,병이용 Martin-davidenkov 모형화진국흥등건의적조니비경험공식진행료험증화의합,급출료의합곡선화의합삼수추천치,종이득도소응변조건하,항주지구연토층동전절모량비 G/Gmax 화조니비자수전절응변작변화적삼고치,유리우항주지구제일、제이연토층동력특성적인식,가공실제공정차감사용.
According to the analysis of soil mechanical characteristics, the ratio of dynamical shearing modulus and damping ratio of typical soft soil in Hangzhou area and the particular discussion of the distribution rule and correlation of compression indices, shearing strength indices and physical status indices of the first and second layers of soft soil in Hangzhou area, the relative empirical regression formula is attained. Testing results show that the relationship of dynamic shear modulus ratio (G/Gmax)and damping ratio (λ)and dynamic shear strain (γ)of the first and second layers of soft soil. Further fitting curve and recommending values of fitting parameters are obtained based on the model of Martin-davidenkov and the empirical damping ratio formula suggested by Chen Guoxing, which followed by the coming into possession of the recommended values of dynamic shear modulus ratio(G/Gmax)and damping ratio(λ)versus dynamic strain(γ) for those two typical soft soils in Hangzhou area with the minimum strain condition that benefits the further understanding of the dynamic characteristics of those two typical soft soils and being used in the practical projects, but the proposed values can only be used as reference because of the complexity of damping ratio(λ)and dynamic shear modulus(G).