CAJ | 학술논문

近年来随着光纤的问世，光网络也慢慢被广泛的应用，这使得波分复用技术的应用及其制作工艺显得尤为重要。目前熔锥型波分复用器的制作工艺已被广泛应用于生产中，但由于对其制作条件研究比较单一，造成生产上成品率不高。在此通过用熔融拉锥法制作1×2波分复用器时，分别在不改变其他参数的情况下采用不同制作周期，不同氢气流量和不同拉锥速度，并发现这些制作条件会对波分复用器信道间隔造成一定影响，同时利用的热力学中的有效加热时间和激活能对出现的现象及结果进行了解释。
근년래수착광섬적문세，광망락야만만피엄범적응용，저사득파분복용기술적응용급기제작공예현득우위중요。목전용추형파분복용기적제작공예이피엄범응용우생산중，단유우대기제작조건연구비교단일，조성생산상성품솔불고。재차통과용용융랍추법제작1×2파분복용기시，분별재불개변기타삼수적정황하채용불동제작주기，불동경기류량화불동랍추속도，병발현저사제작조건회대파분복용기신도간격조성일정영향，동시이용적열역학중적유효가열시간화격활능대출현적현상급결과진행료해석。
With the appearance of optical fiber in recent years,the optical network is widely used,which makes the appli?cation of the wavelength division multiplexer (WDM) technology and its production craftsmanship become very important. The production craftsmanship of the fused taper WDM has been broadly applied in production presently. Since the study on produc?tion conditions is limited,the rate of finished products is low in production. When the 1×2 WDM is produced with the fused bi?conical taper(FBT),the different production cycles,different hydrogen flows and different tapering speeds are adopted respec?tively in the condition of remaining other parameters invariant. It is found that the conditions have some influence on the WDM channel spacing. The appeared phenomenon and results are explained by the effective heating time and activation energy in ther?modynamics.